The G90 combines two ±15° geared leveling axes with a 90° tilting base for precise composition and downward framing with large-format and technical cameras. Position and lock the base by hand, then refine the image with the geared controls. The upper panning clamp rotates manually through 360°.
The self-locking worm drive holds its position when the knob stops, without a separate movement lock.
To pan the upper clamp, release its lever, turn it by hand and lock it in position.
The upper clamp accepts Arca-type plates. A 60 mm quick-release plate is included. The base provides an Arca-type dovetail and 3/8-inch and 1/4-inch mounting sockets.
Specifications
| Recommended maximum load | 10 kg |
| Tilt travel | ±15° on each of two axes |
| Panning travel | 360° (manual) |
| Manual tilting base | 0–90° |
| Weight | 798 g, excluding the quick-release plate |
| Overall dimensions | 80 × 98 × 85 mm (including knobs) |
| Height | 80 mm |
Maintenance-free in normal use; no additional oil or grease is required. Cameras, lenses and other support equipment shown are not included.
Operation
Support the camera by hand while releasing and adjusting the tilting base. Tighten the lock before letting go.
