S2283 combines a rear RS1 module with an FS1 or FS2 front module for the modular TC18 mini view camera system. Together with a compatible focusing rail and bellows, these modules provide front and rear camera movements.
FS1 and FS2 configurations
The RS1 rear standard uses knob-controlled shifts and provides tilt and swing. With the FS1 front module, both standards have knob-controlled horizontal shift and rise/fall, together with tilt and swing.
The FS2 front module uses manual push adjustment for shift, followed by locking. This configuration suits assemblies where the front standard is used mainly for tilt and swing, while rear shifts control composition.
Rail, bellows and interfaces
The modular system can use a 250 mm rail with four-fold bellows or a 350 mm rail with six-fold bellows. Select the camera or back adapter and matching bellows interface for the intended DSLR, mirrorless camera or digital back. Lens boards and camera-side interfaces are separate components. Available movements depend on the assembled modules, bellows, mechanical clearance and lens coverage.
