The S2338 connects a large-sensor industrial camera with an M72×0.75 interface to a SWEBO mini view camera optical assembly. The bellows links the camera-side thread to the interchangeable front lens-board system.
A defined mechanical interface
The camera connection is M72×0.75: both the 72 mm nominal diameter and 0.75 mm pitch must match. Sensor size by itself does not determine whether an industrial camera can be attached.
The front accepts the corresponding interchangeable lens-board arrangement. Use a board matched to the lens mount or shutter rather than assuming all lenses with a similar diameter are interchangeable.
Focus and movement limits
Check the complete lens-to-sensor distance, rear-lens clearance, available bellows compression and extension, and lens image circle. These determine infinity focus and the usable camera movements. This bellows is a mechanical and light-tight connection; it does not add electronic camera or lens control.
Specifications
| Camera-side thread | M72×0.75 |
| Application | Industrial-camera connection to a mini view camera |
| Compatibility checks | Thread diameter and pitch, flange distance, clearance and image circle |